DIN valve standard(EN/ISO)-part2
DIN 3535-1
Sealants for gas supplies; elastomeric gasket materials for gas valves in domestic installations; requirements and tests
DIN 3535-5
Rubber/cork and rubber/cork synthetic fiber based gasket materials for use with gas valves, gas appliances and gas pipe work
DIN 3535-6
Gaskets for gas supply – Part 6: Gasket materials based on synthetic fibers, graphite or polytetrafluoroethylen (PTFE) for gas valves, gas appliances and gas mains
DIN 3537-1
Gas stop valves rated for pressures up to 4 bar; requirements and acceptance testing
DIN 3543-1
Metal tapping valves; requirements, testing
DIN 3543-2
Metallic tapping stop valves; dimensions
DIN 3543-3, Publication date:1978-07
PVC tapping valves for plastic pipes; dimensions
DIN 3543-4
High density polyethylene (HDPE) tapping valves for HDPE pipes; dimensions
DIN 3544-1
High-density polyethylene (HDPE) valves; tapping valves; requirements and test
DIN 3852-1
Ports and stud ends with metric fine pitch thread, for use with compression couplings, valves and screw plugs; Dimensions
DIN 3852-2
Stud ends and tapped holes with pipe thread, for use with compression couplings, valves and screw plugs; Dimensions
DIN 3852-11
Stud ends and tapped holes for use with compression couplings, valves and screw plugs – Type E stud end dimensions
DIN 19208
Flow measurement; mating dimensions and application of shut-off valves for differential pressure transducers and differential pressure piping
DIN 19578-1
Stop valves for site drainage systems; anti-flooding valves for faucal sewage systems; requirements
DIN 20042
Water valve, nominal pressure 40 – Dimensions and requirements
DIN EN 28233
Thermoplastics valves; torques; test method (ISO 8233:1988)
DIN 30677-1
Corrosion protection of buried valves; coating for normal requirement
DIN 30677-2
External corrosion protection of buried valves; heavy-duty thermoset plastics coatings
DIN 32509
Hand-operated shut-off valves for welding, cutting and allied processes – Type of construction, safety requirements, tests
DIN 42560
Transformers; Throttle-valves NW 80, Dimensions, Tightness Testing
DIN 74279
Air braking systems – Charging valves
DIN 86251
Shut off valves for shipboard use, of cast iron, with flanges, DN 15 to 500
DIN 86252
Non return valves for shipboard use, cut off type, of cast iron, with flanges, DN 15 to 500
DIN 86260
Shut off valves for shipboard use, of gun metal, with flanges, DN 15 to 500
DIN 86261
Non return valves for shipboard use, cut off type, of gun metal, with flanges, DN 15 to 500
DIN 86501
Valves, screwed bonnet type of gun metal with 24???-connection with port end W according to DIN 3861
DIN 86528
Tab washers for screwed bonnet valves
DIN 86552
Valves, screwed bonnet type of steel with 24???-connection with port end W according to DIN 3861
DIN 86720
Gate valves flat sided of gun metal with screwed bonnet and flanges, DN 20 to DN 100, PN 16
DIN 87101, Publication date:2003-10
Non-return flaps (storm valves), self-closing, vertical type, DN 50 up to DN 150, PN 1 – Mating dimensions for flanges according to PN 10
DIN 87901
Sniffle valves for pumps
DIN EN 488
District heating pipes – Preinsulated bonded pipe systems for directly buried hot water networks – Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene; German version EN 488:2003
DIN EN 558-1
Face-to-face and center-to-face dimensions of metal industrial valves for use in flanged pipe systems – PN designated valves
DIN EN 558-2
Face-to-face and center-to-face dimensions of metal industrial valves for use in flanged pipe systems – Class-designated valves
DIN EN 736-1
Valves – Terminology – Types of valves
DIN EN 736-2
Valves – Terminology – Part 2: Definition of components of valves
DIN EN 736-3
Valves – Terminology – Part 3: Definition of terms (includes Amendment A1:2001); English version of DIN EN 736-3:1999 + A1:2001
DIN EN 917
Plastics piping systems – Thermoplastics valves – Test methods for resistance to internal pressure and leak-tightness
DIN EN 1092-1
Flanges and their joints – Circular flanges for pipes, valves, fittings and accessories – Part 1: Steel flanges, PN designated
DIN EN 1092-2
Circular flanges for pipes, valves, fittings and accessories, PN designated – Part 2: Cast iron flanges
DIN EN 1092-4
Flanges and their joints – Circular flanges for pipes, valves, fittings and accessories, PN designated – Part 4: Aluminium alloy flanges
DIN EN 1680
Plastics piping systems – Valves for polyethylene (PE) piping systems – Test method for leaktightness under and after bending applied to the operating mechanism
DIN EN 1705
Plastics piping systems – Thermoplastics valves – Test method for the integrity of a valve after an external blow; German version EN 1705:1996
DIN EN 28233
Thermoplastics valves; torques; test method (ISO 8233:1988)