BS Valve Standard(EN/ISO)-part2

BS Valve Standards( EN ISO)-part2

BS 4062-1:1982
Valves for hydraulic fluid power systems – Methods for determining pressure differential/flow characteristics
BS 4062-2:1990
Valves for hydraulic fluid power systems – Methods for determining performance
BS4090:1966
Cast iron check valves for general purposes
BS4133:1967
Flanged steel parallel slide valves for general purposes
BS4312:1968
Flanged steel screw down stop valves and check valves for general purposes                BS ISO 4401:1996                                                                                                      Hydraulic fluid power – Four-port directional control valves – Mounting surfaces                BS 4460:1969                                                                                                                    Steel ball valves for the petroleum industry

BS 5041:1987
Fire hydrant systems equipment – Specification for landing valves for wet risers
BS 5146 P1:1984
Steel valves for the petrochemical and allied industries
BS 5150:1990 – Withdrawn, Superseded
Specification for cast iron gate valves
BS 5151:1982 – Withdrawn, Superseded
Specification for cast iron gate (parallel slide) valves for general purposes
BS 5152:1989 – Withdrawn, Superseded
Cast iron globe & globe stop and check valves
BS 5153:1989 – Withdrawn, Superseded
Cast iron check valves for general purposes
BS 5154:1991
Specification for copper alloy globe, globe stop and check, check and gate valves
BS 5155:1992
Specification for butterfly valves
BS 5156:1990
Specification for diaphragm valves
BS 5157:1989
Specification for steel gate (parallel slide) valves
BS 5158:1989
Specification for cast iron plug valves
BS 5159:1982
Cast iron and carbon steel ball valves for general purposes
BS 5160:1989
Specification for steel globe valves, globe stop and check valves and lift type check valves
BS 5163:1991
Specification for predominantly key-operated cast iron gate valves for waterworks purposes                                                                                                                                    BS EN ISO 5210:1996                                                                                                 Industrial valves – Multi-turn valve actuator attachments                                                     BS 5351:1990                                                                                                                    Steel ball valves for petroleum, petrochemical and allied industries                                    BS 5352:1990                                                                                                                   Steel wedge gate, globe and check valves 50mm and small

BS 5353:1989
Specification for steel plug valves
BS 5417:1976
Testing of general purpose industrial valves
BS 5418:1984
Specification for marking of general purpose industrial valves
BS 5672:1991
Specification for designation of the direction of retation and of cylinders and valves in cylinder heads, and definition of right-hand and left-hand in-line engines and locations on engines for reciprocating internal combustion engines
BS 5793-4:1987
Industrial-process control valves – Specification for inspection and routine testing
BS 5793-6:1986
Industrial-process control valves – Specification for mounting details for attachment of positioners to control valve actuators
BS 5834-1:1985
Surface boxes, guards and underground chambers for gas and waterworks purposes – Specification for guards, including foundation units
BS 5834-2:1983
Surface boxes, guards and underground chambers for gas and waterworks purposes – Specification for small surface boxes
BS 5834-3:1985
Surface boxes, guards and underground chambers for gas and waterworks purposes – Specification for large surface boxes
BS 5834-4:1989
Surface boxes, guards and underground chambers for gas and waterworks purposes – Specification for preformed chambers
BS 5995:1980
Methods of test for electrohydraulic servovalves

BS ISO 6263:1997
Hydraulic fluid power – Compensated flow-control valves – Mounting surfaces
BS 6282-2:1982
Devices with moving parts for the prevention of contamination of water by backflow – Specification for check valves of nominal size up to and including DN 54
BS 6282-3:1982
Devices with moving parts for the prevention of contamination of water by backflow – Specification for in-line anti-vacuum valves of nominal size up to and including DN 42
BS 6282-4:1982
Devices with moving parts for the prevention of contamination of water by backflow – Specification for combined check and anti-vacuum valves of nominal size up to and including DN 42
BS 6283-2:1991
Safety and control devices for use in hot water systems – Specifications for temperature relief valves for pressures from 1 bar to 10 bar
BS 6283-4:1991
Safety and control devices for use in hot water systems – Specification for drop-tight pressure reducing valves of nominal size up to and including DN 50 for supply pressures up to and including 12 bar
BS 6494-4:1989
Hydraulic fluid power valve mounting surfaces – Specification for clamping dimensions of four-part, size 03 and 05, modular stack valves and directional control valves
BS 6675:1986
Specification for servicing valves (copper alloy) for water services
BS 6683:1985
Guide to installation and use of valves
BS 6697:1986
Methods of test for electrohydraulic proportional control valves
BS 6755-2:1987
Testing of valves – Specification for fire type-testing requirements
BS 6759-1:1995
Safety valves – Part 1. Specification for safety valves for steam and hot water
BS 6759-2:1997
Safety valves – Part 2. Safety valves for compressed air or inert gas
BS 6759-3:1995
Safety valves – Part 3. Specification for safety valves for process fluids
BS 6821:1988
Methods for aerodynamic testing of dampers and valves

BS 7296-1:1990
Cavities for hydraulic fluid power cartridge valves – specification for two-port slip-in valves
BS 7350:1990
Specification for double regulating globe valves and flow measurement devices for heating and chilled water systems
BS 7389-1:1990
Pneumatic fluid power valve mounting surfaces – specification for five-port directional control valves (without electrical motor)
BS 7438:1991
Specification steel and copper alloy waffer check valves, single disk, spring-loaded type

BS EN 12119:1997
Plastics piping systems – Polyethylene (PE) valves – Test method for resistance to thermal cycling
BS EN 14141:2003
Valves for natural gas transportation in pipelines – Performance requirements and tests
BS EN 14189:2003
Transportable gas cylinders. Inspection and maintenance of cylinder valves at time of periodic inspection of gas cylinders. Partially replaces BS 341-1:1991

BS EN 28233:1992
Thermoplastics valves – Torque – Test method
BS EN 28659:1992
Thermoplastics valves – Fatigue strength – Test method

BS EN 60534-1:1989
Industrial-process control valves – Industrial-process control valves – Control valve terminology and general considerations
BS EN 60534-2-1:1999
Industrial-process control valves – Flow capacity – Flow capacity – Sizing equations for fluid flow under installed conditions
BS EN 60534-2-3:1998
Industrial-process control valves – Flow capacity – Test procedures
BS EN 60534-2-5:2003
Industrial-process control valves – Flow capacity – Sizing equations for fluid flow through multistage control valves with interstage recovery
BS EN 60534-3-1:2000
Industrial-process control valves – Dimensions – Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves
BS EN 60534-3-2:2001
Industrial-process control valves – Dimensions – Face-to-face dimensions for rotary control valves except butterfly valves
BS EN 60534-3-3:1998
Industrial-process control valves – Dimensions – End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves
BS EN 60534-5:2004
Industrial-process control valves – Marking
BS EN 60534-6-1:1998
Industrial-process control valves – Mounting details for attachment of positioners to control valves – Positioner mounting on linear actuators
BS EN 60534-6-2:2001
Industrial-process control valves – Mounting details for attachment of positioners to control valves – Positioner mounting on rotary actuators
BS EN 60534-8-1:2001
Industrial-process control valves – Noise considerations – Laboratory measurement of noise generated by aerodynamic flow through control valves
BS EN 60534-8-2:1991
Industrial-process control valves – Noise considerations – Laboratory measurement of noise generated by hydrodynamic flow through control valves
BS EN 60534-8-3:2000
Industrial-process control valves – Noise considerations – Control valve aerodynamic noise prediction method
BS EN 60534-8-4:1994
Industrial-process control valves – Noise considerations – Prediction of noise generated by hydrodynamic flow
BS EN 60730-2-8:2002
Specification for automatic electrical controls for household and similar use – Particular requirements – Particular requirements for electrically operated water valves, including mechanical requirements

One Reply to “BS Valve Standard(EN/ISO)-part2”

Leave a Reply