Posted on

DIN valve standard(EN/ISO)-part2

DIN valve standard(EN/ISO)-part2

DIN 3535-1
Sealants for gas supplies; elastomeric gasket materials for gas valves in domestic installations; requirements and tests
DIN 3535-5
Rubber/cork and rubber/cork synthetic fiber based gasket materials for use with gas valves, gas appliances and gas pipe work
DIN 3535-6
Gaskets for gas supply – Part 6: Gasket materials based on synthetic fibers, graphite or polytetrafluoroethylen (PTFE) for gas valves, gas appliances and gas mains
DIN 3537-1
Gas stop valves rated for pressures up to 4 bar; requirements and acceptance testing
DIN 3543-1
Metal tapping valves; requirements, testing
DIN 3543-2
Metallic tapping stop valves; dimensions
DIN 3543-3, Publication date:1978-07
PVC tapping valves for plastic pipes; dimensions
DIN 3543-4
High density polyethylene (HDPE) tapping valves for HDPE pipes; dimensions
DIN 3544-1
High-density polyethylene (HDPE) valves; tapping valves; requirements and test
DIN 3852-1
Ports and stud ends with metric fine pitch thread, for use with compression couplings, valves and screw plugs; Dimensions
DIN 3852-2
Stud ends and tapped holes with pipe thread, for use with compression couplings, valves and screw plugs; Dimensions
DIN 3852-11
Stud ends and tapped holes for use with compression couplings, valves and screw plugs – Type E stud end dimensions
DIN 19208
Flow measurement; mating dimensions and application of shut-off valves for differential pressure transducers and differential pressure piping
DIN 19578-1
Stop valves for site drainage systems; anti-flooding valves for faucal sewage systems; requirements
DIN 20042
Water valve, nominal pressure 40 – Dimensions and requirements
DIN EN 28233
Thermoplastics valves; torques; test method (ISO 8233:1988)
DIN 30677-1
Corrosion protection of buried valves; coating for normal requirement
DIN 30677-2
External corrosion protection of buried valves; heavy-duty thermoset plastics coatings
DIN 32509
Hand-operated shut-off valves for welding, cutting and allied processes – Type of construction, safety requirements, tests
DIN 42560
Transformers; Throttle-valves NW 80, Dimensions, Tightness Testing
DIN 74279
Air braking systems – Charging valves
DIN 86251
Shut off valves for shipboard use, of cast iron, with flanges, DN 15 to 500
DIN 86252
Non return valves for shipboard use, cut off type, of cast iron, with flanges, DN 15 to 500
DIN 86260
Shut off valves for shipboard use, of gun metal, with flanges, DN 15 to 500
DIN 86261
Non return valves for shipboard use, cut off type, of gun metal, with flanges, DN 15 to 500
DIN 86501
Valves, screwed bonnet type of gun metal with 24???-connection with port end W according to DIN 3861
DIN 86528
Tab washers for screwed bonnet valves
DIN 86552
Valves, screwed bonnet type of steel with 24???-connection with port end W according to DIN 3861
DIN 86720
Gate valves flat sided of gun metal with screwed bonnet and flanges, DN 20 to DN 100, PN 16
DIN 87101, Publication date:2003-10
Non-return flaps (storm valves), self-closing, vertical type, DN 50 up to DN 150, PN 1 – Mating dimensions for flanges according to PN 10
DIN 87901
Sniffle valves for pumps
DIN EN 488
District heating pipes – Preinsulated bonded pipe systems for directly buried hot water networks – Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene; German version EN 488:2003
DIN EN 558-1
Face-to-face and center-to-face dimensions of metal industrial valves for use in flanged pipe systems – PN designated valves
DIN EN 558-2
Face-to-face and center-to-face dimensions of metal industrial valves for use in flanged pipe systems – Class-designated valves
DIN EN 736-1
Valves – Terminology – Types of valves
DIN EN 736-2
Valves – Terminology – Part 2: Definition of components of valves
DIN EN 736-3
Valves – Terminology – Part 3: Definition of terms (includes Amendment A1:2001); English version of DIN EN 736-3:1999 + A1:2001
DIN EN 917
Plastics piping systems – Thermoplastics valves – Test methods for resistance to internal pressure and leak-tightness
DIN EN 1092-1
Flanges and their joints – Circular flanges for pipes, valves, fittings and accessories – Part 1: Steel flanges, PN designated

DIN EN 1092-2
Circular flanges for pipes, valves, fittings and accessories, PN designated – Part 2: Cast iron flanges
DIN EN 1092-4
Flanges and their joints – Circular flanges for pipes, valves, fittings and accessories, PN designated – Part 4: Aluminium alloy flanges
DIN EN 1680
Plastics piping systems – Valves for polyethylene (PE) piping systems – Test method for leaktightness under and after bending applied to the operating mechanism
DIN EN 1705
Plastics piping systems – Thermoplastics valves – Test method for the integrity of a valve after an external blow; German version EN 1705:1996
DIN EN 28233
Thermoplastics valves; torques; test method (ISO 8233:1988)

Posted on

DIN valve standard(EN/ISO)-part1

DIN valve standard(EN/ISO)-part1

DIN 475-1
Widths across flats for bolts, screws, valves and fittings
DIN 475-2
Wrench and socket openings
DIN 477-1
Gas cylinder valves rated for test pressures up to 300 bar; types, sizes and outlets
DIN 477-4
Compressed gas cylinder valves; swing check valves for camping-cylinders
DIN 477-5
Gas cylinder valves – Part 5: For test pressure up to 450 bar max.; Outlet connections
DIN 477-6
Gas cylinder valves; test pressures 300 bar and 450 bar, with cylindrical thread for valve stem and gas cylinder neck for breathing apparatus; sizes, threads
DIN 477-9 (Draft standard)
Gas cylinder valves, for highest grade gases; sizes, connections, threads
DIN 1690-10
Technical delivery conditions for castings of metallic materials; supplementary requirements for steel castings used for heavy-duty valves
DIN 3202-4
Face-to-face and center-to-face dimensions of valves; Valves with female thread connection
DIN 3202-5
Face-to-face and center-to-face dimensions of valves; valves for connection with compression couplings
DIN 3230-3
Technical delivery conditions for valves; Compilation of test methods
DIN 3230-4
Technical Conditions of Delivery for Valves; Valves for Potable Water Service, Requirements and Testing
DIN 3230-5
Technical delivery conditions; valves for gas installations and gas pipelines; requirements and testing
DIN 3230-6
Technical delivery conditions for valves; requirements and methods of test for valves for use with flammable liquids
DIN 3266-1
Valves for drinking water installations on private premises; PN 10 pipe interrupters, pipe disconnectors, anti-vacuum valves
DIN 3266-2
Valves for drinking water installations on private premises; PN 10 pipe interrupters, pipe disconnectors, anti-vacuum valves; testing
DIN 3320-1
Safety valves; safety shut-off valves; definitions, sizing, marking
DIN 3320-3 (Draft standard)
Safety valves; safety shut-off valves; center for face dimensions of flanged safety valves to PN 40 and to DN 250 inlet
DIN 3339
Valves; body component materials
DIN 3352-1
Gate Valves; General Information
DIN 3352-2
Cast iron gate valves, with metallic seat and inside screw stem
DIN 3352-3
Cast iron gate valves, with metallic seat and outside screw stem
DIN 3352-4
Cast iron gate valves with elastomeric obturator seatings and inside screw stem
DIN 3352-5
Steel gate valves, isomorphs series
DIN 3352-13
Double-socket cast iron gate valves, with elastomeric obturator seat and inside screw stem
DIN 3356-1
Globe valves; General data
DIN 3356-2
Globe valves; Cast iron stop valves
DIN 3356-3
Globe valves; Unalloyed steel stop valves
DIN 3356-4
Globe valves; High temperature steel stop valves
DIN 3356-5
Globe valves; Stainless steel stop valves
DIN 3357-1
Metal ball valves; general requirements and methods of test
DIN 3357-2
Full bore steel ball valves
DIN 3357-3
Reduced bore steel ball valves
DIN 3357-4
Full bore nonferrous metal ball valves
DIN 3357-5
Reduced bore nonferrous metal ball valves
DIN 3381
Safety devices for gas supply installations operating at working pressures up to 100 bar; pressure relief governors and safety shut-off devices
DIN 3399
Gas low-pressure cut-off valves; safety requirements, testing
DIN 3441-1
Unplasticized polyvinyl chloride (PVC-U) valves; requirements and testing
DIN 3441-2
Unplasticized polyvinyl chloride (PVC-U) valves; ball valves; dimensions
DIN 3441-3
Unplasticized polyvinyl chloride (PVC-U) valves; diaphragm valves; dimensions
DIN 3441-4
Valves of Rigid PVC (Unplasticized or Rigid Polyvinyl Chloride); Y-valves (Inclined-seat Valves), Dimensions
DIN 3441-5
Unplasticized polyvinyl chloride (PVC-U) valves; PN 6 and PN 10 wafer type butterfly valves; dimensions
DIN 3441-6
Unplasticized polyvinyl chloride (UPVC) valves; gate valves with inside screw stem; dimensions
DIN 3442-1
Polypropylene (PP) valves; requirements and testing
DIN 3442-2
Fittings of PP (Polypropylene); Ball valves, Dimensions
DIN 3442-3
Polypropylene (PP) valves; diaphragm valves; dimensions
DIN 3475
Spheroidal graphite cast iron valves and fittings provided with internal corrosion protection by means of enamelling, for use in drinking water supply systems; requirements and testing
DIN 3476
Corrosion protection of water valves and pipe fittings by epoxy powder or liquid epoxy resin linings – Requirements and testing
DIN 3500
PN 10 piston type gate valves for use in drinking water supply systems
DIN 3502
Stopvalves for drinking water supplies on and in private property; straight pattern globe valves with oblique bonnet, rated for nominal pressure PN 10
DIN 3512
Stopvalves for domestic water supply – Two-way valves – Vertical bonnet type PN 10; Straight pattern globe valve; Technical rule of the DVGW

Posted on

BS Valve Standard(EN/ISO)-part2

BS Valve Standards( EN ISO)-part2

BS 4062-1:1982
Valves for hydraulic fluid power systems – Methods for determining pressure differential/flow characteristics
BS 4062-2:1990
Valves for hydraulic fluid power systems – Methods for determining performance
BS4090:1966
Cast iron check valves for general purposes
BS4133:1967
Flanged steel parallel slide valves for general purposes
BS4312:1968
Flanged steel screw down stop valves and check valves for general purposes                BS ISO 4401:1996                                                                                                      Hydraulic fluid power – Four-port directional control valves – Mounting surfaces                BS 4460:1969                                                                                                                    Steel ball valves for the petroleum industry

BS 5041:1987
Fire hydrant systems equipment – Specification for landing valves for wet risers
BS 5146 P1:1984
Steel valves for the petrochemical and allied industries
BS 5150:1990 – Withdrawn, Superseded
Specification for cast iron gate valves
BS 5151:1982 – Withdrawn, Superseded
Specification for cast iron gate (parallel slide) valves for general purposes
BS 5152:1989 – Withdrawn, Superseded
Cast iron globe & globe stop and check valves
BS 5153:1989 – Withdrawn, Superseded
Cast iron check valves for general purposes
BS 5154:1991
Specification for copper alloy globe, globe stop and check, check and gate valves
BS 5155:1992
Specification for butterfly valves
BS 5156:1990
Specification for diaphragm valves
BS 5157:1989
Specification for steel gate (parallel slide) valves
BS 5158:1989
Specification for cast iron plug valves
BS 5159:1982
Cast iron and carbon steel ball valves for general purposes
BS 5160:1989
Specification for steel globe valves, globe stop and check valves and lift type check valves
BS 5163:1991
Specification for predominantly key-operated cast iron gate valves for waterworks purposes                                                                                                                                    BS EN ISO 5210:1996                                                                                                 Industrial valves – Multi-turn valve actuator attachments                                                     BS 5351:1990                                                                                                                    Steel ball valves for petroleum, petrochemical and allied industries                                    BS 5352:1990                                                                                                                   Steel wedge gate, globe and check valves 50mm and small

BS 5353:1989
Specification for steel plug valves
BS 5417:1976
Testing of general purpose industrial valves
BS 5418:1984
Specification for marking of general purpose industrial valves
BS 5672:1991
Specification for designation of the direction of retation and of cylinders and valves in cylinder heads, and definition of right-hand and left-hand in-line engines and locations on engines for reciprocating internal combustion engines
BS 5793-4:1987
Industrial-process control valves – Specification for inspection and routine testing
BS 5793-6:1986
Industrial-process control valves – Specification for mounting details for attachment of positioners to control valve actuators
BS 5834-1:1985
Surface boxes, guards and underground chambers for gas and waterworks purposes – Specification for guards, including foundation units
BS 5834-2:1983
Surface boxes, guards and underground chambers for gas and waterworks purposes – Specification for small surface boxes
BS 5834-3:1985
Surface boxes, guards and underground chambers for gas and waterworks purposes – Specification for large surface boxes
BS 5834-4:1989
Surface boxes, guards and underground chambers for gas and waterworks purposes – Specification for preformed chambers
BS 5995:1980
Methods of test for electrohydraulic servovalves

BS ISO 6263:1997
Hydraulic fluid power – Compensated flow-control valves – Mounting surfaces
BS 6282-2:1982
Devices with moving parts for the prevention of contamination of water by backflow – Specification for check valves of nominal size up to and including DN 54
BS 6282-3:1982
Devices with moving parts for the prevention of contamination of water by backflow – Specification for in-line anti-vacuum valves of nominal size up to and including DN 42
BS 6282-4:1982
Devices with moving parts for the prevention of contamination of water by backflow – Specification for combined check and anti-vacuum valves of nominal size up to and including DN 42
BS 6283-2:1991
Safety and control devices for use in hot water systems – Specifications for temperature relief valves for pressures from 1 bar to 10 bar
BS 6283-4:1991
Safety and control devices for use in hot water systems – Specification for drop-tight pressure reducing valves of nominal size up to and including DN 50 for supply pressures up to and including 12 bar
BS 6494-4:1989
Hydraulic fluid power valve mounting surfaces – Specification for clamping dimensions of four-part, size 03 and 05, modular stack valves and directional control valves
BS 6675:1986
Specification for servicing valves (copper alloy) for water services
BS 6683:1985
Guide to installation and use of valves
BS 6697:1986
Methods of test for electrohydraulic proportional control valves
BS 6755-2:1987
Testing of valves – Specification for fire type-testing requirements
BS 6759-1:1995
Safety valves – Part 1. Specification for safety valves for steam and hot water
BS 6759-2:1997
Safety valves – Part 2. Safety valves for compressed air or inert gas
BS 6759-3:1995
Safety valves – Part 3. Specification for safety valves for process fluids
BS 6821:1988
Methods for aerodynamic testing of dampers and valves

BS 7296-1:1990
Cavities for hydraulic fluid power cartridge valves – specification for two-port slip-in valves
BS 7350:1990
Specification for double regulating globe valves and flow measurement devices for heating and chilled water systems
BS 7389-1:1990
Pneumatic fluid power valve mounting surfaces – specification for five-port directional control valves (without electrical motor)
BS 7438:1991
Specification steel and copper alloy waffer check valves, single disk, spring-loaded type

BS EN 12119:1997
Plastics piping systems – Polyethylene (PE) valves – Test method for resistance to thermal cycling
BS EN 14141:2003
Valves for natural gas transportation in pipelines – Performance requirements and tests
BS EN 14189:2003
Transportable gas cylinders. Inspection and maintenance of cylinder valves at time of periodic inspection of gas cylinders. Partially replaces BS 341-1:1991

BS EN 28233:1992
Thermoplastics valves – Torque – Test method
BS EN 28659:1992
Thermoplastics valves – Fatigue strength – Test method

BS EN 60534-1:1989
Industrial-process control valves – Industrial-process control valves – Control valve terminology and general considerations
BS EN 60534-2-1:1999
Industrial-process control valves – Flow capacity – Flow capacity – Sizing equations for fluid flow under installed conditions
BS EN 60534-2-3:1998
Industrial-process control valves – Flow capacity – Test procedures
BS EN 60534-2-5:2003
Industrial-process control valves – Flow capacity – Sizing equations for fluid flow through multistage control valves with interstage recovery
BS EN 60534-3-1:2000
Industrial-process control valves – Dimensions – Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves
BS EN 60534-3-2:2001
Industrial-process control valves – Dimensions – Face-to-face dimensions for rotary control valves except butterfly valves
BS EN 60534-3-3:1998
Industrial-process control valves – Dimensions – End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves
BS EN 60534-5:2004
Industrial-process control valves – Marking
BS EN 60534-6-1:1998
Industrial-process control valves – Mounting details for attachment of positioners to control valves – Positioner mounting on linear actuators
BS EN 60534-6-2:2001
Industrial-process control valves – Mounting details for attachment of positioners to control valves – Positioner mounting on rotary actuators
BS EN 60534-8-1:2001
Industrial-process control valves – Noise considerations – Laboratory measurement of noise generated by aerodynamic flow through control valves
BS EN 60534-8-2:1991
Industrial-process control valves – Noise considerations – Laboratory measurement of noise generated by hydrodynamic flow through control valves
BS EN 60534-8-3:2000
Industrial-process control valves – Noise considerations – Control valve aerodynamic noise prediction method
BS EN 60534-8-4:1994
Industrial-process control valves – Noise considerations – Prediction of noise generated by hydrodynamic flow
BS EN 60730-2-8:2002
Specification for automatic electrical controls for household and similar use – Particular requirements – Particular requirements for electrically operated water valves, including mechanical requirements

Posted on

BS Valve Standard(EN/ISO)-part1

BS Valve Standards( EN ISO)-part1

BS 341-1:1991
Transportable gas container valves. Specification for industrial valves for working pressures up to and including 300 bar (REPLACED by BS EN 14189:2003) , BS 341-3:2002) , BS EN 849:1997) , BS EN ISO 13340:2001) , BS EN ISO 14246:2001) , BS 341-4:2004)
BS 341-2:1963
Transportable Gas Container Valves. Valves with Taper Stems for Use with Breathing Apparatus. (REPLACED by BS 341-1:1991) , BS EN 849:1997) , BS EN ISO 12209-1:2001) , BS EN ISO 12209-2:2001) , BS EN ISO 12209-3:2001)
BS 341-3:2002
Transportable gas container valves. Valve outlet connections
BS 341-4:2004
Transportable gas container valves. Pressure relief devices
BS EN 488:2003
District heating pipes – Preinsulated bonded pipe systems for directly buried hot water networks – Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
BS EN 558-1:1996
Industrial values face to face and center to face dimensions of metal valves for use in flanged pipe systems. Part 1 PN designated valvesBS
EN 558-2:1996
Industrial valves face to face and center to face dimensions of metal valves for use in flanged piping systems. Part 2 class-designated valves
BS EN 561:2002
Gas welding equipment – Quick-action coupling with shut-off valves for welding, cutting and allied processes
BS EN 736-1:1995
Valves – Terminology – Definition of types of valves
BS EN 736-2:1997
BS 759-1:1984
Valves, gauges and other safety fittings for application to boilers and to piping installations for and in connection with boilers. Specification for valves, mountings and fittings
Valves – Terminology – Definition of components of valves
BS EN 816:1997
Sanitary tapware – Automatic shut-off valves PN 10
BS EN 917:1997
Plastics piping systems – Thermoplastics valves – Test methods for resistance to internal pressure and leaktightness

BS EN 1092-2:1997
Flanges and their joints – Circular flanges for pipes, valves, fittings and accessories, PN designated – Cast iron flanges
BS EN 1112:1997
Shower outlets for (PN 10) sanitary tapware
BS 1123-1:1990
Safety valves, gauges and fusible plugs for compressed air or inert gas installations – Code of practice for installation
BS 1212-1:1990
Float operated valves – Specification for piston type float operated valves (copper alloy body) (excluding floats)
BS 1212-1:1990
Float operated valves – Specification for piston type float operated valves (copper alloy body) (excluding floats)
BS 1212-3:1990
Float operated valves – Specification for diaphragm type float operated valves (plastics bodied) for cold water services only (excluding floats)
BS 1212-4:1990
Float operated valves – Specification for compact type float operated valves for WC flushing cisterns (including floats)
BS 1552:2004
Specification for open bottomed taper plug valves for 1st, 2nd and 3rd family gases up to 200 mbar
BS 1570:1960
Flanged and but weld-welding end steel plug valves for the petroleum industry (excluding well -head and flow-line valves)
BS1655:1976
Flanged automatic control valves for the process control industry (face to face dimensions)
BS EN 1680:1997
Plastics piping systems – Valves for polyethylene (PE) piping systems – Test method for leaktightness under and after bending applied to the operating mechanism
BS EN 1704:1997
Plastics piping systems – Thermoplastics valves – Test method for the integrity of a valve after temperature cycling under bending
BS EN 1705:1997
Plastics piping systems – Thermoplastics valves – Test method for the integrity of a valve after an external blow
BS 1735:1966
Flanged cast iron outside-screw-and-yoke wedge gate valve, class 125, sizes 1 1/3 in to 24 in, for the petroleum industry
BS 1868:1975
Specification for steel check valves (flanged and butt-welding ends) for the petroleum, petrochemical and allied industries
BS 1873:1975
Specification for steel globe and globe stop and check valves (flanged and butt-welding ends) for the petroleum, petrochemical and allied industries
BS1952:2000
Copper alloy valves for general purposes
BS1953:2000
Copper alloy check valves for general purposes
BS1963:1990
Specification for pressure operated relay valves for domestic, commercial and catering gas appliances
BS 1968:1953
Specification for floats for ball valves (copper)

BS2060:2000
Copper alloy screw down stop valves for general purposes
BS2080:1995
Specification for face to face, center to face, end to end and center to end dimensions of valves
BS 2456:1990
Specification for floats (plastics) for float operated valves for cold water services
BS 2879:1980
Specification for draining taps (screw-down pattern)
BS2995:1966
Cast and forged steel wedge gate, globe, check and plug valve, screwed and socket welding, sizes 2 in and smaller, for the petroleum industry

BS 3457:1973
Specification for materials for water tap and stop valve seat washers
BS 3464:2000
Cast iron wedge and double disk gate valves for general purposes
BS3808:1964
Cast and forged steel flanged, screwed and socket welding wedge gate valves (compact design), sizes 2 in and smaller, for the petroleum industry
BS3948:1965
Cast iron parallel slide valves for general purposes
BS3952:1965
Cast iron butterfly valves for general purposes
BS3961:1965
Cast iron screw down stop valves and stop and check valves for general purposes