Contact info

Contact info

Hydro power Valve Sets(Butterfly or Ball)

Hydro power Valve Sets (Butterfly valve or Ball valve)usually used installed before Turbine in large and middle size hydro power station,as an accident valve and maintenance valve, the inlet valve usually only has two working states: fully open or fully closed, and cannot be used to regulate flow. The main valve is not allowed to open under dynamic water conditions.

More details

Inquiry

Bookmark and Share
Butterlfy Type Standard and Scope:

Size: NPS 4"~160"  DN100~DN4000                            
Pressure Rating:  PN6~PN40                
Connection: Double flange, Wafer, Weld
Temperature:-10℃ ~ 90℃
Medium: water, raw water,non-corrosive liquid
Operation: Manual, Hydraulic, Electric, Eletro-hydraulic
Body Material: Ductile iron, Carbon steel, Stainless steel
Trim Material: Ductile iron, Carbon steel, Stainless steel, Copper alloy
Seat Material : Rubber (double eccentric) , Metal( triple offset), PTFE
Test and Inspection: GB/T13927, BS EN12569
End Connection:  GB/T 9124.1~6, EN1092-1, ANSI B16.5 client requirement 
 
Ball Type Standard and Scope:

Size: NPS 4"~80"  DN100~DN2000                            
Pressure Rating:  PN16~PN100                
Connection: Double flange , Weld
Temperature:-10℃ ~ 90℃
Medium: water, raw water,non-corrosive liquid
Operation: Hydraulic, Electric, Eletro-hydraulic
Body Material: Carbon steel, Stainless steel
Ball Material: CS+Cr/Ni, Stainless steel, Copper alloy
Test and Inspection: GB/T13927, BS EN12569
End Connection:  GB/T 9124.1~6, EN1092-1, ANSI B16.5 client requirement 
 
Butterfly valve are widely used in power plants with water heads below 250m. Ball valves are used in large and medium-sized power plants with a water head greater than 200 meters. 
 
MAIN PARTS: Butterfly valve or Ball valve, Hydraulic power station, Electric control cabinet, Expansion coupling, Connection pipes, Bypass system, Air vent valve, Drain valve

4 other products in the same category: