Valve Material requirement of carbon steel, austenitic stainless steel, duplex stainless steel, 17/4 PH stainless steel, soft seat and seal material (Part 1)- Executed project-SGPK03

Valve Material requirement of carbon steel, austenitic stainless steel, duplex stainless steel, 17/4 PH stainless steel, soft seat and seal material (Part 1)- Executed project-SGPK03

1.Carbon Steel and Impact Tested Carbon Steel

The chemical composition of carbon steel castings and forgings shall be limited as follows:

Carbon content 0.22% max

Carbon equivalent 0.43% max by ladle analysis where :

CEV = C + Mn/6 + (Cr+Mo+V)/5 +(Cu + Ni)/15

NACE MR0175 specified material shall also have limitations on chemical composition as follows :

Continue reading “Valve Material requirement of carbon steel, austenitic stainless steel, duplex stainless steel, 17/4 PH stainless steel, soft seat and seal material (Part 1)- Executed project-SGPK03”

Flow direction of globe valve, down-to-up or up-to-down, Stem diameter?

Generally speaking, the flow of globe vales is from down to up. It means the medium will go through from disc downside then out by upside. Globe valves usually adopt compulsory sealed design, so close valve by offer pressure to disc against seat. So if you want to open valve, the globe valve disc must overcome resistance made by stem and packing friction, medium pressure will offer adverse pressure which help open valve. It means you can use less force than closing valve. So the stem diameter should be larger, to avoid stem bending fault.(depends on metal material physical performance of stem ). In recent years, there are more and more valve pressure seal, the medium through upper disc to down disc, so the close valve force is smaller than the open valve force, valve shaft diameter are allowed to be smaller.

Continue reading “Flow direction of globe valve, down-to-up or up-to-down, Stem diameter?”

Wafer type Dual plate check valve updated

SGV updated it’s product: Wafer type Dual plate check valve

It has many ways of calling, Dual plate, Duo disc, Double disc, Double plate check valve, it is swing type, also a butterfly type check valve, spring loaded to help return quickly. It is a retainerless check valve,  can be lug type, flanged type also. It has wide application by choose suitable material. Can be used for following industry, food, building, oil and gas, pipeline, chemical, petrochemical, waste water, transportation and so on.

More information, contact us

Marathon Petroleum to Purchase BP’s Texas City Refinery – Valves

Marathon Petroleum Corp. (MPC) today announced it has signed a definitive agreement to purchase BP’s 451,000 barrel per calendar day (475,000 barrel per stream day) Texas City refinery, three intrastate NGL pipelines originating at the refinery, an allocation of BP’s Colonial Pipeline Company shipper history, four terminals, retail marketing contract assignments for approximately 1,200 branded sites and a 1,040 megawatt cogeneration (cogen) facility. The base purchase price is $598 million, plus inventories estimated at $1.2 billion. The agreement also contains an earnout provision under which MPC could pay up to an additional $700 million over six years, subject to certain conditions. The transaction is expected to be accretive to earnings in the first year of operation. Continue reading “Marathon Petroleum to Purchase BP’s Texas City Refinery – Valves”

Vacuum Gate Valve – Product Maintenance & Installation Manual

Vacuum Gate Valve

Product Maintenance & Installation Manual

Sangong Flow Control Co.,Limited

 

Application

This Vacuum valve is used for vacuum and minus pressure system and cooling water system of thermal power plant, as well as minus pressure cooling water systems of chemical, medicine industries, used as cut off and stop device.

Continue reading “Vacuum Gate Valve – Product Maintenance & Installation Manual”

Vacuum Globe Valve-Product Installation & Maintenance Manual

Vacuum Globe Valve

 

Sangong Flow Control Co.,Limited

 

Product Installation & Maintenance Manual

 

Service

This vacuum valve is mainly used in heat-engine plant’s vacuum minus pressure and condensation system, Petrochemical, Pharmaceuticals and other industry’s negative pressure condensation system. as a open-close and separation device.

Performance

1. Pressure: PN10~100.0bar

2. Nominal diameter: DN10~DN150mm

3.Medium: Water、Steam、Air、Oil

4. Working Temperature: Carbon steel t≤425  ,alloy t≤530

Working principle and structure

Continue reading “Vacuum Globe Valve-Product Installation & Maintenance Manual”